Mob Mount Magnetic

The cradle itself has three padded arms, with just one sliding mechanism to hold the phone. The sliding arm presses the device into the two fixed arms, locking it into place.

The single slide features a manual twist-lock mechanism to secure the cradle. This allows for a more rugged build, with less moving parts as well as user-guided precise cradle locking.

You will need to adjust the cradle every time you insert and remove the phone. This system makes for a longer-lasting, more durable locking system for prolonged use in rough environments.

There are no additional accessories needed to mount your phone in the cradle. It was designed to work with most modern phones, even with thick cases such as an OtterBox.

It depends on your device. Any charging port in the bottom center of the phone is freely accessible, along with all buttons on the sides of your phone. Speakers are generally unaffected. As for cameras, modern phone camera array shapes and sizes have changed drastically over the time, and we find that the cradle can cover some cameras under normal use.

The cradle is built from powder-coated billet aluminum, with the device being protected from vibration and movement by closed-cell EVA foam. It does not protect your phone from environmental factors such as dirt, water, mud, flying debris, snow / ice, etc.

Technically, yes. It is designed for modern smartphones, however if your device fits within the cradle (Min/Max Cradle Height: 4.4"/7.2”; Min/Max Cradle Width: 2.4"/3.4"; Cradle Depth: 0.6"), you can mount it! Verify your devices dimensions before purchasing.

No, it does not. The cradle is solid aluminum and does not have space for an additional charger. Most devices will still have access to the charging ports on the bottom for wired charging while on-the-go.

The main difference between the MobNetic and the Mob Mount lines are how the device itself is mounted. The MobNetic line utilizes a magnetic device mounting head, which allows for faster device removal and more mounting versatility – along with compatibility with our FLEX accessories. The Mob Mount line uses a padded three-point, single-slide cradle, holding your device a bit more securely, but not as easy on-off device access.

Each mount is shipped with Adhesive Mounting Discs made specifically for mounting versatility. The 1.5” diameter steel disc has residue-free VHB adhesive, allowing you to create a magnet-ready mounting surface on practically any hard, smooth surface – dashboard, desk, work bench; anywhere you can stick a disc, you can mount your phone.

Attaching an Adhesive Mounting Disc requires a flat, mostly smooth surface for maximum adhesion. Dashboards that are soft (squishy), have rough texture, or are covered with fabric or other woven material are not good candidates for mounting. We recommend an area of dashboard or trim with enough clearance for the phone to tilt to the right viewing angle, flat enough for the disc to adhere properly. Never mount in an area that interferes with driver or passenger safety (windshield, airbag covers, etc).

Simply lift the mount off of the disc or mounting surface – that's it! Thousands of users carry their mount between different vehicles and work areas, utilizing multiple Adhesive Mounting Discs while sticking with just one mount. A new car doesn’t mean a new mount, just a new disc.

Our mounts to be as easy to install as they are to use daily. If you have a ferrous surface to attach the magnet base, you’re ready to go out of the box. If you need to install the included Adhesive Mounting Disc, follow the instructions closely – it's as simple as cleaning the surface and pressing down to help adhesion. However, it’s important to wait 24-48 hours for the adhesive to cure for maximum hold, before attaching a mount or phone.