TabNetic Maxx

TabNetic Maxx mounts can hold any size iPad® or Android tablet with ease, no matter what case you’re using. The 290lb pull-force magnets can hold up to 20 times your tablets weight – meaning not only is it held in place, but it is secure on rough roads or trails.

You do not need a special case for the TabNetic Maxx. It uses a simple 290lb pull-force, device-safe magnet to hold your tablet in place. Most tablets and cases do however require placing our Adhesive Device Plate on them to complete the hold.

Yes, it will hold practically any case when using the Adhesive Device Plate. The mount does not need to interface directly with the tablet to hold in place – case or no case, you can mount it.

No, the magnets will not interfere with your devices hardware. All Mob Armor magnetic mounts use device-safe neodymium magnets.

Mounting your tablet requires using the included Adhesive Device Plate on the back of your tablet or case. At only 0.02” thick, the Plate allows for a strong magnetic bond with the TabNetic Maxx, while being slim enough to remain low-profile to your device.

There are a few different base mounting options for the TabNetic Maxx. The most popular is Magnetic, which attaches to ferrous surfaces on its own, or elsewhere with the included Adhesive Mounting Disc, which uses residue-free VHB adhesive to mount to places like your dashboard. We also offer a Tube mounting base, with dual clamps to hold on to tubes 1.5” to 2”; as well as a Direct mounting base, which allows for more permanent mounting with included hardware. Reach out to us if you need help determining the best fit for your setup.

Of all of the mounting options, the TabNetic Maxx Magnetic is the easiest one to move between mounting areas. Wherever there is a Disc or a ferrous surface, you can mount it. The Tube, Direct, and Flush mounting options offer a more permanent mounting solution, and require tooling to move.

All TabNetic Maxx mounts except for the Flush are capable of full 180° tilt and 360° rotation, thanks to a tensioned ball joint and dual-notched housing. You can adjust your viewing angle at any time, no tools or tightening needed.

The main difference between the TabNetic and the Tab Mount lines are how the device itself is mounted. The TabNetic line utilizes a magnetic device mounting head, which allows for faster device removal and more mounting versatility. The Tab Mount line uses a padded three-point sliding cradle, holding your device a bit more securely, but not as simple on-off device access.

All magnetic base mounts come with Adhesive Mounting Discs, which feature a residue-free VHB adhesive to secure the steel disc to your dash or other surface. We recommend against placing the Adhesive Mounting Disc on soft surfaces like leather or fabric. If you need to mount in one of these areas, you’ll need to explore our non-magnetic mounting options, like the Tube or Direct base.

Yes, our Direct base allows for this precisely. It features a 4.25" x 2.50" Aluminum Base Plate with dual countersunk holes for 1/4-20 flat head screws – all mounting hardware is included.

Your tablet won’t be going anywhere. The magnetic base used in the Tab Mount Maxx has been tested and trusted everywhere from long-haul trucking, to the Baja 1000 off road race. Designed to stand up to 290lbs of pull-force, you would need to encounter some serious vehicle-damaging conditions before the mount moved.

Yes, absolutely. You can find accessories and replacement parts here.