MobNetic & TabNetic Device Plate Application

STEP ONE

clean phone or case surface with wipe packet #1

Thoroughly clean the phone or case mounting surface with the included degreasing wipes.

STEP TWO

clean phone or case surface with wipe packet #2

After the degreasing wipe residue has dried, thoroughly clean the surface again with the included alcohol prep pad.

STEP THREE

allow surface to dry for 60 seconds

Once thoroughly cleaned, allow the surface to dry for at least 60 seconds. There should be no visible cleaning product left.

STEP FOUR

peel the backing from adhesive side and do not touch adhesive

Peel the protective backing off of the adhesive side of the Device Plate. Be careful to not touch the exposed adhesive.

STEP FIVE

place device plate on mounting surface and press down for 60 seconds

Place the Device Plate on the cleaned mounting surface. Press down firmly for at least 60 seconds to ensure strongest bond.

STEP SIX

allow device adhesive to set for 24 hours before use

Allow Device Plate adhesive to set for at least 24 hours (48 hours in warmer temperatures) before any use. Do not attach to any mount during this time.